|
New
Replacement Part Search
Marine Fuel Injection
Products
Performance Fuel Injectors
Replacement Fuel Injectors
Fuel Injector Accessories
Harley Davidson Injection
Engine Mngt Systems
Pro Fuel Rails
Fuel Filters
Fuel Pressure Regulators
Fuel Dampers
Fuel Pumps
Fuel Line Components
Throttle Bodies
Sensors
Tools
Electrical Components
Services
Injector Service
Harley Davidson Injector Service
Competition Program
Information
Frequently Asked Questions
Injector Selection Guide
Fuel Filter Selection Guide
About
About Us
Contact Information
|
|
Sensors
Coolant Temperature Sensor
Engine coolant temperature is one of the primary sources of information for an engine management system. This sensor varies resistance from 100,000 ohms at -40°F to 50 ohms at 300°F. Can also be used as an oil temperature or cylinder head temperature sensor, especially for air-cooled engines. Has 3/8" NPT threads and comes with matching weather-tight connector for ease of wiring.
|
 |
|
|
|
Air Charge Temperature Sensor
Produces a variable resistance based on temperature to input intake air temperature to the engine management system. This sensor varies resistance from 100,000 ohms at -40°F to 50 ohms at 300°F. Open-cage element responds more quickly to changes in air temperature than typical sealed sensors. Also useful for monitoring intercooler efficiency. Has 3/8" NPT threads and comes with matching weather-tight connector for ease of wiring.
|
 |
|
|
|
1 Bar MAP Sensor
Outputs a voltage proportional to the amount of pressure present in an intake manifold. Approximate dynamic range of 1-5 volts. This sensor is designed for normally-aspirated engines.
|
 |
|
|
|
2 BAR MAP Sensor
Outputs a voltage proportional to the amount of pressure present in an intake manifold. Approximate dynamic range of 1-5 volts. This sensor is designed for forced induction engines producing no more than 1 BAR (14.7 PSI) of boost.
|
|
|
|
|
3 BAR MAP Sensor
Outputs a voltage proportional to the amount of pressure present in an intake manifold. Approximate dynamic range of 1-5 volts. This sensor is designed for forced induction engines producing no more than 2 BAR (29.4 PSI) of boost.
|
|
|
|
|
Bosch LSU 4.2 wide band lambda sensor
Bosch wide-band lambda sensor as used with many wide band air/fuel ratio meters and controllers. For use with unleaded gasoline, diesel, methanol/ethanol, propane, etc. Note: Service life will be greatly decreased if used with leaded fuel.
|
 |
|
|
|
NOTE: There is a $30 minimum for all orders. All orders for in-stock components will be processed in 1-2 working days. Special orders and custom components will be subject to availability. Specifying UPS Next Day or Second Day shipping does NOT guarantee components will be shipped on the day the order is placed, so please allow 1-2 days for processing or call for shipment status.
|
