|
New
Replacement Part Search
Marine Fuel Injection
Products
Performance Fuel Injectors
Replacement Fuel Injectors
Fuel Injector Accessories
Harley Davidson Injection
Engine Mngt Systems
Pro Fuel Rails
Fuel Filters
Fuel Pressure Regulators
Fuel Dampers
Fuel Pumps
Fuel Line Components
Throttle Bodies
Sensors
Tools
Electrical Components
Services
Injector Service
Harley Davidson Injector Service
Competition Program
Information
Frequently Asked Questions
Injector Selection Guide
Fuel Filter Selection Guide
About
About Us
Contact Information
|
|
High Pressure Electric Fuel Pumps
In-Line Fuel Pump
43 gph @ 40 psi, 12 volts/5.4 amps. Has 3/8 " hose nipple inlet, 5/16" outlet. 500 HP
|
 |
|
|
|
Walbro Inline Fuel Pump
Compact inline fuel pump, can be mounted in-tank or inline. Flows 60 GPH (gallons per hour) at 40 PSI and 40 GPH at 80 PSI (all ratings at 12 volts). Typical current draw at 80 PSI is 12 amps. Includes pump and installation kit with brackets and 7/16" hose-barb inlet/outlet fittings. AN -6 fittings sold separately below.
|
 |
|
|
|
-6AN fitting for Walbro pump 0102
A -6AN fitting for the Walbro 0102 pump listed above. This fitting may be used on the inlet or outlet. Does not come with copper seal. Price is per fitting, 2 required for most installations.
|
 |
|
|
|
High Volume External/Internal Fuel Pump
This pump will support 650 HP at 45 PSI. Can be outfitted with -8 or -10 AN inlet and outlet fittings at additional cost.
|
 |
|
|
|
High Volume External/Internal Fuel Pump
This pump will support 650 HP at 45 PSI. Can be outfitted with -6 or -8 AN outlet fitting at additional cost, features a 3/8" hose barb inlet.
|
 |
|
|
|
Ultra-capacity Fuel Pump
High pressure, ultra-high volume 12-volt fuel pump will support up to 1900 hp at 40 PSI. Flows over 160 GPH at 40 PSI and 14 volts, over 150 GPH at 60 PSI and 14 volts, and over 130 GPH at 80 PSI and 14 volts. Gear-type pump increases durability and volume. Rated for continuous duty at 65 PSI or less, intermittent duty up to 100 PSI.
|
 |
|
|
|
Complete list of pumps is not listed here so give us a call
if you have an unique application.
NOTE: There is a $30 minimum for all orders. All orders for in-stock components will be processed in 1-2 working days. Special orders and custom components will be subject to availability. Specifying UPS Next Day or Second Day shipping does NOT guarantee components will be shipped on the day the order is placed, so please allow 1-2 days for processing or call for shipment status.
|
